HC
STRAIGHT BLADE
Blade Width: 9' & 10'
Fits: Truck Class 4 - 7 (low-end)
Moldboard: Powder-Coated Steel
PUT YOUR FLEET ON THE STREET
.
Make short work of big storms. The 9′ and 10′ FISHER® HC heavy contractor snowplows are built for big trucks and designed to move large amounts of snow. So no matter what contractors or municipality plow drivers get thrown their way, they can move the snow, then move on to the next parking lot or street, time and time again.
UNIQUE FEATURES
.
PLOW BLADE CONSTRUCTION
The HC snowplow features a massive 34″-tall, 11-gauge, powder coated steel blade that is available in 9′ and 10′ widths. The aggressive attack angle and blade overhang promote a clean scrape and snow rolling.
PLOW BLADE CONSTRUCTION
STRUCTURAL REINFORCEMENT
The HC snowplow features heavy-duty vertical ribs, gussets and pins, all reinforced by Fisher Engineering’s proven T-frame design. This design is built strong to withstand even the heaviest snow for heavy-duty commercial and municipal vehicle applications.
STRUCTURAL REINFORCEMENT
OSCILLATING A-FRAME
With its oscillating A-frame, the HC snow plow pivots from side to side allowing the blade to follow the contours of the plowing surface for improved scraping and even cutting edge wear.
OSCILLATING A-FRAME
CURB GUARDS (PAIR)
Protect your blade with a pair of genuine FISHER® curb guards. Constructed of abrasion-resistant material and designed to fit tight to the blade, these curb guards will allow you to plow along curbs with confidence and precision, without damaging your blade.
CURB GUARDS (PAIR)
STANDARD PLOW FEATURES
.
INTENSIFIRE™ SNOW PLOW HEADLIGHTS
Available in both LED and Dual-Halogen models, INTENSIFIRE™ plow headlights are engineered and tested for maximum light output, performance, and durability to keep you ahead of the next storm.
INTENSIFIRE™ SNOW PLOW HEADLIGHTS
MINUTE MOUNT 2 MOUNTING SYSTEM
The FISHER Minute Mount® 2 system has been engineered for superior safety, durability, and convenience. The mechanical nature of its design means that there are no sensitive electronics that could fail and prevent you from attaching or removing your plow.
MINUTE MOUNT 2 MOUNTING SYSTEM
TRIP-EDGE PROTECTION
Our industry-leading trip-edge design protects you and your equipment when encountering hidden obstacles. For improved efficiency and less cleanup, only the bottom edge trips, keeping the blade upright and plowed snow in front of the blade.
TRIP-EDGE PROTECTION
RELIABLE HYDRAULICS
We design and manufacture our own hydraulics to ensure the highest standards of performance, quality, and durability—giving you a plow that is fast, responsive, and built to last. This allows plow drivers to change the blade position quickly and easily for efficient plowing.
RELIABLE HYDRAULICS
CHAIN LIFT DESIGN
The FISHER® chain lift design offers a wide range of performance and reliability advantages over a direct lift system.
CHAIN LIFT DESIGN
FLEET FLEX ELECTRICAL SYSTEM
The FLEET FLEX Electrical System minimizes intrusion to your vehicle during installation and also provide reliable connections between your vehicle and plow. It's completely universal to all current FISHER snowplows so that plow fleets are able to optimize their operations and use any plow on any vehicle.
FLEET FLEX ELECTRICAL SYSTEM
SECURITY GUARD™ ANTI-THEFT SYSTEM
The HS compact design incorporates two trip springs, allowing the blade to trip forward when encountering hidden obstacles, The exclusive SECURITY GUARD anti-theft system is a safe and secure way to electronically lock your snow plow whenever it is detached from your truck.
SECURITY GUARD™ ANTI-THEFT SYSTEM
STORM GUARD™ BAKED-ON POWDER COAT
The industry’s best protection against wear and rust, the STORM GUARD™ baked-on powder coat with epoxy primer is standard on all FISHER® snow plows.
STORM GUARD™ BAKED-ON POWDER COAT
UNIVERSAL PLOW CONTROL OPTIONS
Choose between the ergonomic Fish-Stik® hand-held control or the dash-mounted joystick control. Both feature automatic shutoff, backlit buttons for night operation, and LED lights which indicate "power" and "float" mode.
UNIVERSAL PLOW CONTROL OPTIONS
ISOLATION MODULE
An under hood module transfers lights from vehicle to plow automatically and improves system reliability by using plug 'n play, sealed electrical connections. Isolating the plow's electrical system from the vehicle's prevents the potential of electrical system damage.
ISOLATION MODULE
PRE-PUNCHED BLADES FOR ACCESSORIES
The blade is pre-punched for easy installation of accessories, providing a custom fit. The pre-punched holes also prevent damage to the powder coat that can sometimes occur when installing an accessory.
PRE-PUNCHED BLADES FOR ACCESSORIES
PRODUCT SPECIFICATIONS
.
| Models | 9′ | 10′ |
|---|---|---|
| Moldboard Options | Powder-Coated Steel | Powder-Coated Steel |
| Blade Type | Straight Blade | Straight Blade |
| Vehicle Compatibility | Truck Class 4 – 7 (low-end) | Truck Class 4 – 7 (low-end) |
| Approx. Weight* (Without Mount) | 1,178 lbs | 1,312 lbs |
| Plowing Width (Full Angle) | 7’11” | 8’10” |
| Blade Width | 9′ | 10′ |
| Blade Height | 34″ | 34″ |
| Blade Thickness | 11 ga | 11 ga |
| Trip Springs | 6 | 6 |
| Ribs | 8 | 8 |
| Lift Cylinder | 1¾” x 10″ | 1¾” x 10″ |
| Angling Rams | 2″ x 12½” | 2″ x 12½” |
| Cutting Edge | ½” x 6″ (Standard) | ½” x 6″ Steel (Standard) |
| Mount Type | Minute Mount® 2 | Minute Mount® 2 |
CHECK OUT FISHER® SNOWPLOW ACCESSORIES
We carry a full line of accessories for all your FISHER products.
