TRAILBLAZER™ HEAVY-DUTY
V-PLOW & STRAIGHT BLADE SNOWPLOWS
Blade Width: 6'0"
Fits: Full Sized UTVs & Tractors
Moldboard: High Strength or Powder-Coated Steel
HIGH STRENGTH OR POWDER-COATED STEEL
.
Get more use out of your UTV or sub-compact tractor with the FISHER® TRAILBLAZER™ heavy-duty straight blade plow or v-plow. These plows are engineered to fit a wide variety of compact vehicles and to handle the same demands as our full-sized commercial plows. Constructed from high-strength, low-alloy steel components, both models feature an easy-on/easy-off mounting system and removable receiver brackets for exceptional ground clearance. TRAILBLAZER HD plows also feature Scrape Lock for clean scraping and back dragging.
UNIQUE FEATURES
.
RELIABLE HYDRAULICS
We design and manufacture our own hydraulics to ensure the highest standards of performance, quality, and durability—giving you a plow that is fast, responsive, and built to last. This allows plow drivers to change the blade position quickly and easily for efficient plowing.
RELIABLE HYDRAULICS
GROUND CLEARANCE
Receiver brackets can be easily removed, restoring your vehicle back to its original ground clearance when the plow is not in use.
GROUND CLEARANCE
SCRAPE LOCK
The FISHER® Scrape Lock system locks the plow in any position you put it in to give you a cleaner scrape, especially while back dragging. With the plow locked in place, Scrape Lock gives you the performance of a larger plow without the extra weight and without the need to push any extra buttons.
SCRAPE LOCK
UTV MOUNTING SYSTEM
To hook up the TRAILBLAZER™ v-plow or straight blade with the receiver brackets installed on your utility vehicle, either drive in or manually push the plow into the receivers. Push up on the headgear to engage the hitch pins in the receiver holes, then slide the handle to lock the hitch pins in place. Finally, connect the electrical plug.
UTV MOUNTING SYSTEM
BLADE CONSTRUCTION – STRAIGHT
The 6′ wide, 14-gauge powder coated steel moldboard and standard 5″ high-carbon steel cutting edge make the TRAILBLAZER™ straight blade a strong choice that is the right size for your UTV.
BLADE CONSTRUCTION – STRAIGHT
STRUCTURAL REINFORCEMENT – STRAIGHT
With four vertical ribs and high-strength, low-weight, alloy steel construction, the TRAILBLAZER™ UTV straight blade is strong enough for commercial operation and light enough to fit most UTVs.
STRUCTURAL REINFORCEMENT – STRAIGHT
TRIP PROTECTION – STRAIGHT
Two heavy-duty coil springs protect your plow and UTV by allowing the whole blade to trip when striking obstacles.
TRIP PROTECTION – STRAIGHT
BLADE CONSTRUCTION – V-PLOW
Featuring a 6′ wide powder coated steel flared moldboard, the TRAILBLAZER™ UTV v-plow blades go from a 25 ¾” center height to a full 29 ¼” at the outer edge. A high-carbon steel cutting edge also comes standard, increasing wear resistance.
BLADE CONSTRUCTION – V-PLOW
STRUCTURAL REINFORCEMENT – V-PLOW
The high-strength, low-weight alloy steel components are both stronger and lighter so your vehicle can work hard without having to carry the extra weight. It is also reinforced with six vertical ribs, and has the strength of our proven T-frame design.
STRUCTURAL REINFORCEMENT – V-PLOW
TRIP PROTECTION – V-PLOW
The v-plow blade has independent trip-edge protection to get over bumps and hidden obstacles, whether in V, scoop or straight blade configuration, helping to protect the plow and the UTV. Since only the bottom edge trips, snow stays in front of the blade, so you can keep on going without dumping the entire load of snow.
TRIP PROTECTION – V-PLOW
DOUBLE-ACTING CYLINDERS – V-PLOW
Double-acting cylinders allow the operator to lock the wings together to use the v-plow in straight blade mode with single button control. Double-acting cylinders also hold the wings firmly in place for clean, efficient back dragging.
DOUBLE-ACTING CYLINDERS – V-PLOW
CENTER SNOW CONTROL - V-PLOW
For exceptional snow containment in all positions, the TRAILBLAZER™ UTV v-plow has a center deflector designed to prevent snow from going over the top of the blade and the formed cutting edges reduce trailing snow.
CENTER SNOW CONTROL - V-PLOW
WIDTH ADJUSTMENT – V-PLOW
When fully angled or in V mode, the TRAILBLAZER™ UTV v-plow plowing path is 5′ wide, and 4′ 7″ in scoop. For UTVs with a wider wheel base, a width-adjustment setting is available to make your plowing path wider in these positions. Using the alternate setting, the plowing width is 5′ 6″ when fully angled or in V, and 5′ 1″ in scoop.
WIDTH ADJUSTMENT – V-PLOW
STANDARD PLOW FEATURES
.
SECURITY GUARD™ ANTI-THEFT SYSTEM
The HS compact design incorporates two trip springs, allowing the blade to trip forward when encountering hidden obstacles, The exclusive SECURITY GUARD anti-theft system is a safe and secure way to electronically lock your snow plow whenever it is detached from your truck.
SECURITY GUARD™ ANTI-THEFT SYSTEM
STORM GUARD™ BAKED-ON POWDER COAT
The industry’s best protection against wear and rust, the STORM GUARD™ baked-on powder coat with epoxy primer is standard on all FISHER® snow plows.
STORM GUARD™ BAKED-ON POWDER COAT
PRE-PUNCHED BLADES FOR ACCESSORIES
The blade is pre-punched for easy installation of accessories, providing a custom fit. The pre-punched holes also prevent damage to the powder coat that can sometimes occur when installing an accessory.
PRE-PUNCHED BLADES FOR ACCESSORIES
UNIVERSAL PLOW CONTROL OPTIONS
Choose between the ergonomic Fish-Stik® hand-held control or the dash-mounted joystick control. Both feature automatic shutoff, backlit buttons for night operation, and LED lights which indicate "power" and "float" mode.
UNIVERSAL PLOW CONTROL OPTIONS
PRODUCT SPECIFICATIONS
.
| Models | V-Plow | Straight Blade |
|---|---|---|
| Moldboard Options | High Strength or Powder-Coated Steel | High Strength or Powder-Coated Steel |
| Blade Type | V-Plow | Straight Blade |
| Vehicle Compatibility | Full Sized UTVs & Tractors | Full Sized UTVs & Tractors |
| Approx. Weight* (Without Mount) | 354 lb | 261 lb |
| Plowing Width | 5’0″ Full Angle** 4’7″ Scoop 5’0″ Full V | 5’4″ Full Angle |
| Blade Width | 6′ | 6′ |
| Blade Height | 29.25″ at End 25.75″ at Hinge | 23.5″ |
| Blade Gauge | 14 ga | 14 ga |
| Trip Springs | 2 | 2 |
| Vertical Ribs | 6 | 4 |
| Angling Rams | 1″ x 8 ¾” | 1″ x 7″ |
| Cutting Edge | ¼” x 5″ (Standard) | ¼” x 5″ (Standard) |
| Mount Type | UTV Mounting System or Tractor Mount Kit | UTV Mounting System or Tractor Mount Kit |
**For UTVs with a wider wheelbase, width can be adjusted to: 5′ 6″ (1.68 m) full angle, 5′ 1″ (1.55 m) scoop, 5′ 6″ (1.68 m) full V.
CHECK OUT FISHER® SNOWPLOW ACCESSORIES
We carry a full line of accessories for all your FISHER products.
