TRAILCOMMANDER™ 250 & 600
STAINLESS STEEL DROP SPREADER
Capacity: 2.5 & 6.0 cu ft
Materials: Salt & Fine Materials
Delivery System: 2" Standard, 3-Point & In-Bed
COMMAND THE SIDEWALK WITH PRECISE SALT PLACEMENT
.
Command your ice control efforts with the new line of FISHER® stainless steel drop spreaders. The TRAILCOMMANDER™ 250 and TRAILCOMMANDER™ 600 provide up to 36″ of spread width in a drop pattern so the salt stays exactly where your vehicle drives, protecting turf and sensitive surfaces bordering the paved area. And with three mounting systems, these units can fit on most UTVs, compact tractors, or wheel loaders to make quick work of sidewalks, walking paths, and other paved surfaces where truck equipment can’t easily gain access.
UNIQUE FEATURES
.
CONSTRUCTION BUILT TO LAST
Laser-cut stainless steel, high strength rivets, and oil filled poly bearings provide a long, maintenance-free service life.
CONSTRUCTION BUILT TO LAST
FITTED LID WITH RUBBER STRAPS
De-icing material is protected by a custom-molded polyethylene lid that includes rubber straps to secure the lid in place.
FITTED LID WITH RUBBER STRAPS
FREE-FLOWING MATERIAL DELIVERY SYSTEM
To ensure material flows consistently into the spreader trough and prevents bridging, the proven material delivery system has a rotating paddle geometry and new interference baffle to agitate the surrounding material.
FREE-FLOWING MATERIAL DELIVERY SYSTEM
VARIABLE-SPEED CONTROL
Enhanced speed control allows you to precisely match material delivery rate to the conditions. A single variable-speed control knob provides precise control of material flow rate.
VARIABLE-SPEED CONTROL
TOP SCREEN & BAG SPLITTER
Break apart large chunks of de-icing material with a stainless steel hatch screen to reduce bridging and clogs during operation. Easily cut open bags of rock salt with the built-in bag splitter for easy loading. The bag splitter can be folded down and kept out of the way.
TOP SCREEN & BAG SPLITTER
EASY-TO-ACTIVATE BAFFLES
Treat sidewalks and walking paths with one or two passes at a spread width of 36 inches. Easy to activate three inch baffles on either side of the trough limit spread width to 33” or 30” to limit damage to sensitive surfaces on either side of the path.
EASY-TO-ACTIVATE BAFFLES
EASY CLEAN-OUT
Drop open the entire bottom of the trough for easy and fast material clean-out after each job. Allowing you to store any leftover de-icing material in a dry, weather-resistant container until you need it for the next job.
EASY CLEAN-OUT
STANDARD 2" RECEIVER HITCH
A detachable 2-inch receiver style mount is provided as a standard feature and includes all the necessary hardware to attach the spreader to the vehicle. This allows the spreaders to be mounted on various equipment; anything with a 2-inch hitch receiver with sufficient payload capacity for the selected spreader.
STANDARD 2" RECEIVER HITCH
STANDARD 3-POINT MOUNT
The 3-Point Mount includes all the pins needed for installation and is intended for compact tractors and articulating loaders. The spreaders have been designed to include attachment points and hardware that are compatible with a 3-point style implement hitch.
STANDARD 3-POINT MOUNT
STANDARD IN-BED MOUNT
The spreaders were designed with in-bed mounting where the units can sit flat and balanced. Brackets and ratchet tie down straps are included to establish correct positioning and to secure the unit in the bed of a UTV. This reduces stress on the equipment allowing for additional versatility to maneuver in tight spaces.
STANDARD IN-BED MOUNT
MOUNTS
.
2" RECEIVER HITCH (STANDARD)
A detachable 2-inch receiver style mount is provided as a standard feature and includes all the necessary hardware to attach the spreader to the vehicle. This allows the spreaders to be mounted on various equipment; anything with a 2-inch hitch receiver with sufficient payload capacity for the selected spreader.
2" RECEIVER HITCH (STANDARD)
3-POINT MOUNT (STANDARD)
The 3-Point Mount includes all the pins needed for installation and is intended for compact tractors and articulating loaders. The spreaders have been designed to include attachment points and hardware that are compatible with a 3-point style implement hitch.
3-POINT MOUNT (STANDARD)
IN-BED MOUNT (STANDARD)
The spreaders were designed with in-bed mounting in mind where the units can sit flat and balanced. Brackets and ratchet tie down straps are included to establish correct positioning and to secure the unit in the bed of a UTV.
IN-BED MOUNT (STANDARD)
PRODUCT SPECIFICATIONS
.
| Models | 250 | 600 |
|---|---|---|
| Vehicle Compatibility | UTVs & Tractors | UTVs & Tractors |
| Material Compatibility | Bagged Salt / Ice Melt, Bulk Salt & Fine Materials | Bagged Salt / Ice Melt, Bulk Salt & Fine Materials |
| Capacity | 2.5 cu ft | 6.0 cu ft |
| Spreading Width | 30″ to 36″ | 30″ to 36″ |
| Approx. Weight (Empty) | 130 lb | 160 lb |
| Hopper Dimensions (LxWxH) | 12.8″ x 36.5″ x 17.25″ | 16.75″ x 36.5″ x 28″ |
| Dimensions Overall (LxWxH) | 17″ x 42″ x 17 ½” | 20″ x 42″ x 28″ |
| Hopper Construction | 201 Stainless Steel | 201 Stainless Steel |
| Motor | Direct Drive, 12V, Sealed | Direct Drive, 12V, Sealed |
CHECK OUT FISHER® SPREADER ACCESSORIES
We carry a full line of accessories for all your FISHER products.
